New HP HPE7-A01 Exam Fee, Latest HPE7-A01 Exam Pattern

Up to now we classify our HPE7-A01 exam questions as three different versions. They are pdf, software and the most convenient one APP online. Though the content of these three versions is the same, but their displays are different. Each of them has their respective feature and advantage including new information that you need to know to pass the HPE7-A01 test. So you can choose the version of HPE7-A01 training quiz according to your personal preference.

Thousands of people will crowd into our website to choose the HPE7-A01 study materials. So people are different from the past. Learning has become popular among different age groups. Our HPE7-A01 guide questions truly offer you the most useful knowledge. You can totally trust us. We are trying our best to meet your demands. Why not give our HPE7-A01 Practice Engine a chance? Our products will live up to your expectations.

>> New HP HPE7-A01 Exam Fee <<

Latest HPE7-A01 Exam Pattern, Pass HPE7-A01 Guaranteed

A lot of applicants have studied from HP HPE7-A01 practice material. They have rated it positively because they have cracked HP HPE7-A01 Certification on their first try. ExamBoosts guarantees its customers that they can pass the HPE7-A01 test on the first attempt.

Candidates can prepare for the exam by enrolling for training courses provided by Aruba or by self-study. It is recommended that candidates should have a minimum of 2-4 years of experience in designing and deploying wireless LAN solutions before taking this certification exam. Passing the HPE7-A01 Aruba Certified Campus Access Professional certification exam validates the candidate’s expertise in designing and implementing wireless LANs using Aruba products and makes them eligible for employment in the IT industry.

HP Aruba Certified Campus Access Professional Exam Sample Questions (Q103-Q108):

NEW QUESTION # 103
Using Aruba best practices what should be enabled for visitor networks where encryption is needed but authentication is not required?

A. Open Network Access
B. Wired Equivalent Privacy
C. Wi-Fi Protected Access 3 Enterprise
D. Opportunistic Wireless Encryption

Answer: D

Explanation:
Explanation
Opportunistic Wireless Encryption (OWE) is a feature that provides encryption for open wireless networks without requiring authentication. OWE uses an enhanced version of the 4-way handshake to establish a pairwise key between the client and the AP, which is then used to encrypt the wireless traffic using WPA2 or WPA3 protocols. OWE can be used for visitor networks where encryption is needed but authentication is not required. References: https://www.arubanetworks.com/assets/tg/TG_OWE.pdf

NEW QUESTION # 104
you need to have different routing-table requirements With Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

A. Create a new SVI and use attach command.
B. Create a new routing table, and attach VLANS to it
C. create a new VLAN, and attach the VRF to it.
D. Create a new VLAN. and attach the routing table to it

Answer: A

Explanation:
The correct answer is C. Create a new SVI and use attach command.
To create a new SVI for a separate routing table, you need to use the attach command to associate the SVI with a VRF (Virtual Routing and Forwarding) instance. A VRF is a logical entity that allows multiple routing tables to coexist on the same switch. Each VRF has its own set of interfaces, routing protocols, and routes that are isolated from other VRFs.
According to the AOS-CX Virtual Switching Framework (VSF) Guide1, one of the steps to configure VRF-aware VSF is:
Configure the VRFs on each member switch and assign the SVIs to the respective VRFs using the attach command. For example:
switch(config)# vrf red
switch(config-vrf)# exit
switch(config)# interface vlan 10
switch(config-if-vlan)# ip address 10.1.1.1/24
switch(config-if-vlan)# attach vrf red
The above commands create a VRF named red and assign VLAN 10 SVI to it. The SVI has an IP address of 10.1.1.1/24.
The other options are incorrect because:
A) You cannot attach a VRF to a VLAN directly. You need to create an SVI for the VLAN and then attach the VRF to the SVI.
B) You cannot create a new routing table manually. You need to create a VRF and then use routing protocols or static routes to populate the routing table for the VRF.
D) You cannot attach a routing table to a VLAN directly. You need to create an SVI for the VLAN and then attach a VRF that has a routing table associated with it.

NEW QUESTION # 105
With the Aruba CX 6100 48G switch with uplinks of 1/1/47 and 1/1/48. How do you automate the process of resuming the port operational state once a loop on a client port is cleared?

A. Configure global loop-protect re-enable-timer.
B. Configure int 1/1/1-1/1/46 loop-protect re-enable-timer.
C. Configure global loop-protect disable timer.
D. Configure int 1/1/1-1/1/52 loop-protect disable timer.

Answer: B

Explanation:
Loop protection is a feature that detects and prevents loops in layer 2 networks. Loop protection can be enabled on ports, LAGs, or VLANs. When loop protection is enabled, the switch sends periodic loop protection messages on the interface and expects to receive them back. If a loop protection message is received back on the same interface, it indicates a loop and the switch takes an action to disable the interface or block traffic on it. The loop-protect re-enable-timer command is used to configure the length of time the switch waits before re-enabling an interface that was disabled due to loop detection. The default value is 0, which means that the interface remains disabled until manually re-enabled. To automate the process of resuming the port operational state once a loop on a client port is cleared, the loop-protect re-enable-timer command can be used with a non-zero value on the interface range that includes the client ports.

NEW QUESTION # 106
A customer is looking Tor a wireless authentication solution for all of their loT devices that meet the following requirements
- The wireless traffic between the IoT devices and the Access Points must be encrypted
- Unique passphrase per device
- Use fingerprint information to perform role-based access
Which solutions will address the customer's requirements? (Select two.)

A. MPSK Local with EAP-TLS
B. MPSK and an internal RADIUS server
C. MPSK Local with MAC Authentication
D. Local User Derivation Rules
E. ClearPass Policy Manager

Answer: B,E

Explanation:
MPSK is a feature that allows device-specific or group-specific passphrases for WPA2 PSK-based deployments. The passphrases are generated by a RADIUS server such as ClearPass Policy Manager and sent to the APs. The wireless traffic between the IoT devices and the APs is encrypted using the passphrases. The passphrases can also be used to perform role-based access by mapping them to different VLANs and user roles 12. ClearPass Policy Manager is a network access control solution that can provide device fingerprinting and profiling for IoT devices based on various attributes such as MAC address, DHCP options, HTTP user agents, etc3. ClearPass Policy Manager can also integrate with other IoT platforms and services to enhance the visibility and security of IoT devices.
References:
1 https://www.arubanetworks.com/techdocs/central/latest/content/aos10x/cfg/aps/wpa2_mpsk.htm
https://docs.fortinet.com/document/fortigate/7.0.0/new-features/139640/wireless-client-mac- authentication-and-
3 https://www.arubanetworks.com/assets/ds/DS_ClearPass.pdf
https://www.arubanetworks.com/assets/tg/TB_ClearPass_IoT.pdf

NEW QUESTION # 107
For an Aruba AOS10 AP in mixed mode, which factors can be used to determine the forwarding role assigned to a client? (Select two.)

A. Client VLAN
B. Client IP address
C. Client MAC address
D. 802.1X authentication result
E. Client SSID

Answer: B,E

Explanation:
* Client IP address: This factor can be used to determine if the client is on the same VLAN as the AP or not. If the client IP address is on the same VLAN as the AP, then the client traffic is bridged locally. If the client IP address is on a different VLAN than the AP, then the client traffic is forwarded to the gateway cluster through a secure tunnel 12.
* Client VLAN: This factor can be used to determine if the client belongs to a specific VLAN or not. If the client belongs to a specific VLAN, then the client traffic is forwarded to that VLAN based on its IP address and security profile 12.

NEW QUESTION # 108
......

These HP HPE7-A01 exam questions are modeled after the HPE7-A01 test. They will assist you in learning how to manage your time during the examination. ExamBoosts enabled all users to regulate time during their Aruba Certified Campus Access Professional Exam HPE7-A01 test. And it can be accomplished via practice, as practice makes perfect. Therefore, you must practice passing the HPE7-A01 exam.

Latest HPE7-A01 Exam Pattern: https://www.examboosts.com/HP/HPE7-A01-practice-exam-dumps.html